Vinyl Decals

click here for application instructions

application steps


Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the sticker from adhering well. Do not try to apply the decal if the window is too hot or to cold as it can cause bubbles and not adhere properly.


Rub a squeegee or credit card firmly across the sticker through the clear transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed.


Peel the paper backing off the sticker very slowly. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.


Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.


Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If the sticker pulls away from the surface repeat Step 4.

Please note this is not a window cling or printed decal. It does not have a background, which means the decal will require a different installation process.


Temperatures affect the decal. Do not apply in direct sunlight or when the surface is too hot, as decal may bubble.
If this occurs simply use a pin and puncture the bubble.


Min application temperature above 46 degrees F is required.


If the decal does not release from the backing paper, gently buff the decal until it adheres to the transfer tape. Temperature changes can cause this issue.


Once the decal touches the mounting surface it can’t be removed.